SYLGARD high voltage insulation coating

　　Characteristics

　　Increase arc resistance and hydrophobicity

　　With the surface after the pollution can restore the performance of water resistance

　　Contains a special arc resistance additive that reduces surface damage in inclement weather

　　Advantages

　　Silicone RTV dispersible coating

　　Can pour liquid

　　Application

　　For glass ceramics and composite products to improve the surface dielectric properties

　　For on-line and stationary insulators, such as insulation kits, instrumentation transformers and other related equipment

　　Improve the surface resistance of the frame type boom

　　Switch and large motor to improve the arc resistance of some of the equipment such as blocking plate

　　Description

　　SYLGARD high-voltage insulation coating for the one-component silicone RTV dispersion, used to improve the ceramic and non-silicone materials, high-voltage insulation and similar parts coated with solidified in the insulator surface will form a smooth layer of elastic film, Water-based, when the surface contamination of the silicone can still maintain a high surface resistance, reduce current leakage and prevent flashover of pollutants.

　　SYLGARD high-pressure insulation coating contains a special arc resistance additives, can reduce the harsh weather, such as salt spray in the state of the state under the damage, the paint can also be used for large switches and large motors need to improve the arc resistance of some equipment such as blocking Plate and so on.

　　Products can reduce the insulation and related equipment maintenance process, such as do not need to repeatedly washed and oil

　　Application method

　　Before use, SYLGARD high-pressure insulation coating evenly in a roll to form a uniform coating.

　　SYLGARD high-pressure insulation coating should be applied to clean and dry surface, the use of SYLGARD high-pressure insulation coating before the parts should be coated with silicone grease completely clean.

　　In addition to glass and ceramics, other parts of the surface should be pretreated to ensure cohesion, the use of pretreatment agent can consult Dow Corning's technical services.

　　After high pressure washing. The surface of the SYLGARD high-pressure insulating coating was previously coated again.

　　The product can be sprayed or painted or dipped. It is recommended that the dry film thickness be 20 mils (0.020 in.) And be sprayed several times to reach this thickness. The cure time depends on temperature and humidity, typically 2-6 hours. Wait 20-30 minutes.